LOCALISED PART LINING

McBreen Environmental offer expert localised part lining repair services to customers nationwide. In some cases where there is only a small section of deformed pipe that needs repair it is more cost effective to use a part liner rather than reline the entire pipeline. McBreen Environmental install a part liner with a resin known as Konodour OMPM.

Localised Part Lining Overview:

This PARTLINER system or localised repair uses a Polyester impregnated corrosion-resistant fibreglass insert. It varies in length from 400mm to 1000mm, depending on the length of deformity in the pipe. We prepare the partliner in a truck and place it on a wet out table. A self-propelled robot places the packer at the correct position in the pipe where the defect is located.

The Curing Process

This PARTLINER system or localised repair uses a Polyester impregnated corrosion-resistant fibreglass insert. It varies in length from 400mm to 1000mm, depending on the length of deformity in the pipe. We prepare the partliner in a truck and place it on a wet out table. A self-propelled robot places the packer at the correct position in the pipe where the defect is located.

A variety of Applications:

We carry out Localised Repairs on pipe sizes ranging from 100mm to 1200mm, therefore it is very adaptable to the job in hand. The Epoxy component achieves superior sealing on wet surfaces. We have installed these on many different factories that have all different types of chemicals entering their lines. This extends the life of the pipe without the need for replacement, and eliminates the expense of digging or relining the entire pipeline.

Advantages of Part Liner Repairs:

  • Installation can be from one access point, minimising the need for digging and the unnecessary disruption associated with it.
  • We repair all defects types in most pipe materials using this method. So we correct fractures, cracks, infiltration and other defects quickly and simply.
  • The advantage of the resin we use is that it can resist temperatures up to 80 degrees and also can resist most chemicals that enter lines.

Top Hat System

Using our epros® Top Hat System with silicate resins we can repair connections directly from the main sewer. This permanently seals them and it is WRC approved. We use these resin systems specifically for lateral connection and short repairs. They are also easy to handle, so we can install them quickly. And they are known for their good mechanical properties and chemical resistance when cured. The patented two-component resin mixture consists of a resin and hardener. McBreen Environmental operatives are fully trained in application of this system to ensure a trouble free long life span.

Get In Touch

If you would like to find out more about Part Liner Repairs, call us today on 0818 66 33 33 or email sales@mcbreen.ie. You can also send us a note on our Contact Us page.